How to fold your Nuna Swiv for collection
The seat stays on and folds down, then one pull on the fold strap collapses the frame so it stands on its own.
Watch it first
Get it ready
Step 1: Empty the basket and any pockets. No need to clean it: we wash every buggy.
Step 2: Take off the rain cover, footmuff, cup holder and anything else clipped on. They go in the box too if you told us about them.
Take it apart
Step 3: Remove the car seat or carrycot if one is fitted.
Step 4: Press the arm bar release buttons and take off the arm bar.
Step 5: Push apart the two pieces of the cup holder clamp and remove it, if you have one.
Fold the frame
Step 6: Press both handle adjustment buttons and move the handle to the second position.
Step 7: Close the canopy.
Step 8: Press the fold button in the middle of the recline adjustment button, then pull the recline adjustment button.
Step 9: Fold the seat down.
Step 10: Pull the stroller fold strap under the seat to fold the buggy.
Step 11: Stand the folded buggy upright.
Good to know
- If the post adapters are fitted instead of the seat, pull the folding webbing on the adapters to fold.
Pack the box
Step 12: Put the folded frame in the box first, wheels down.
Step 13: Slide the seat unit or carrycot in beside it, then tuck the small bits into the gaps. A carrier bag keeps them together.
Step 14: Close the flaps and re-seal the box with the roll of tape we sent: along the middle seam, over the ends and down the sides.
Step 15: Peel the backing off the wallet, with the FedEx label still inside, and stick it on top beside the tape, over any old labels. There is nothing to print.
Buttons and handles move about a little between production years. If yours looks different, the fold steps in your manual are the ones to follow.