How to fold your Stokke Xplory X for collection

Step 1: Empty the basket and any pockets. No need to clean it: we wash every buggy.

Step 2: Take off the rain cover, footmuff, cup holder and anything else clipped on. They go in the box too if you told us about them.

Step 3: Close the canopy.

Step 4: Squeeze the release handle under the back of the seat or carry cot and lift it straight up off the frame.

Step 5: Squeeze the button under the handlebar and slide the handlebar all the way down.

Step 6: Press the button at the handlebar joint and fold the handlebar forwards.

Step 7: Lift the folding lever at the top of the frame.

Step 8: Let the rear wheels swing forwards so the frame folds flat.

Step 9: Put the folded frame in the box first, wheels down.

Step 10: Slide the seat unit or carrycot in beside it, then tuck the small bits into the gaps. A carrier bag keeps them together.

Step 11: Close the flaps and re-seal the box with the roll of tape we sent: along the middle seam, over the ends and down the sides.

Step 12: Peel the backing off the wallet, with the DPD label still inside, and stick it on top beside the tape, over any old labels. There is nothing to print.