Skip to content

How to fold your Egg Egg 3 for collection

Seat or carrycot off, then lower the handle and lift the basket handle to fold the frame, with the seat packed alongside.

Get it ready

  1. Step 1: Empty the basket and any pockets.

  2. Step 2: Take off the rain cover, footmuff, cup holder and anything else clipped on. They go in the box too if you told us about them.

Take it apart

  1. Step 3: To take off the seat unit, press in the grey buttons on each side of the seat and lift it up off the frame.

  2. Step 4: To take off the carrycot, lift the release lever on the back and pull it straight up by its handle.

  3. Step 5: Take off any car seat adaptors, as the frame will not fold with them fitted.

Fold the frame

  1. Step 6: Put the parking brake on and set the front wheels to swivel.

  2. Step 7: Slide the handle down to its lowest position.

  3. Step 8: Rotate the centre section of the handle fully towards you to release the hub locks.

  4. Step 9: Lower the handle to the floor and push until it locks with the latch on the lower frame.

  5. Step 10: Lift the carry handle in the middle of the basket so the front of the frame moves towards the back.

  6. Step 11: Check the travel lock at the front of the frame has clicked on.

Good to know

  • The wheels are quick release: press the button in the centre of each rear wheel, or the button on the back of each front wheel housing, and pull the wheel off.

Pack the box

  1. Step 12: Put the folded frame in the box first, wheels down.

  2. Step 13: Slide the seat unit or carrycot in beside it, then tuck the small bits into the gaps. A carrier bag keeps them together.

  3. Step 14: Tape the box shut along every seam. There is no label to print: the DPD driver brings it.

Buttons and handles move about a little between production years. If yours looks different, the fold steps in your manual are the ones to follow.