How to fold your Joolz Hub+ for collection
The Hub+ folds with the seat still on, facing either way, and stands up on its own.
Watch it first
Get it ready
Step 1: Empty the basket and any pockets. No need to clean it: we wash every buggy.
Step 2: Take off the rain cover, footmuff, cup holder and anything else clipped on. They go in the box too if you told us about them.
Take it apart
Step 3: If the cot is fitted, press the release buttons on both sides underneath it and lift it off.
Fold the frame
Step 4: Lock the front wheels with the swivel lock.
Step 5: Put the brake on.
Step 6: Close the sun hood and recline the seat all the way back.
Step 7: Press the fold button at the handlebar hinge.
Step 8: Fold the handlebar forward.
Step 9: Push the frame down until it folds upright.
Good to know
- Always lock the front wheels before folding, or the tyres can deform.
- You can fold it with the seat world-facing or parent-facing, so there is no need to take the seat off.
Pack the box
Step 10: Put the folded frame in the box first, wheels down.
Step 11: Slide the seat unit or carrycot in beside it, then tuck the small bits into the gaps. A carrier bag keeps them together.
Step 12: Close the flaps and re-seal the box with the roll of tape we sent: along the middle seam, over the ends and down the sides.
Step 13: Peel the backing off the wallet, with the FedEx label still inside, and stick it on top beside the tape, over any old labels. There is nothing to print.
Buttons and handles move about a little between production years. If yours looks different, the fold steps in your manual are the ones to follow.