How to fold your Cybex Gazelle S for collection
Second seat or carry cot comes off, then it folds with the main seat on and locks with the fold lock.
Watch it first
Get it ready
Step 1: Empty the basket and any pockets. No need to clean it: we wash every buggy.
Step 2: Take off the rain cover, footmuff, cup holder and anything else clipped on. They go in the box too if you told us about them.
Take it apart
Step 3: Fold the sun canopy all the way back.
Step 4: If you have a second seat, carry cot or car seat fitted, take it off first.
Fold the frame
Step 5: Put the brake on.
Step 6: Pull the lever on the back of the seat and fold the backrest forwards.
Step 7: Press the fold buttons on the handlebar, then pull the fold lever underneath it.
Step 8: Push the handlebar forwards and down until the stroller folds and clicks.
Step 9: Check the fold lock on the side of the frame has clicked shut.
Good to know
- If the box is tight, all four wheels come off. Press the release button by each wheel and pull the wheel away.
Pack the box
Step 10: Put the folded frame in the box first, wheels down.
Step 11: Slide the seat unit or carrycot in beside it, then tuck the small bits into the gaps. A carrier bag keeps them together.
Step 12: Close the flaps and re-seal the box with the roll of tape we sent: along the middle seam, over the ends and down the sides.
Step 13: Peel the backing off the wallet, with the FedEx label still inside, and stick it on top beside the tape, over any old labels. There is nothing to print.
Buttons and handles move about a little between production years. If yours looks different, the fold steps in your manual are the ones to follow.