How to fold your iCandy Lime for collection
Seat or carrycot off, then release the handlebar and lift the strap so the frame folds upright and clips shut, with the seat packed alongside.
Watch it first
Get it ready
Step 1: Empty the basket and any pockets. No need to clean it: we wash every buggy.
Step 2: Take off the rain cover, footmuff, cup holder and anything else clipped on. They go in the box too if you told us about them.
Take it apart
Step 3: Close the canopy.
Step 4: Press the release buttons on both sides of the seat unit or carrycot and lift it off the frame.
Step 5: Take off any carrycot or car seat adaptors.
Fold the frame
Step 6: Press the button on the handlebar and, at the same time, pull back the release on the side of the frame.
Step 7: Push the handlebar forwards and down.
Step 8: Pull the carry strap straight up to fold the frame together.
Step 9: Check the storage clip at the side of the frame has caught to hold it folded.
Good to know
- The frame can also fold with the seat on if it faces forwards, but the seat off gives the smallest package for the box.
Pack the box
Step 10: Put the folded frame in the box first, wheels down.
Step 11: Slide the seat unit or carrycot in beside it, then tuck the small bits into the gaps. A carrier bag keeps them together.
Step 12: Close the flaps and re-seal the box with the roll of tape we sent: along the middle seam, over the ends and down the sides.
Step 13: Peel the backing off the wallet, with the FedEx label still inside, and stick it on top beside the tape, over any old labels. There is nothing to print.
Buttons and handles move about a little between production years. If yours looks different, the fold steps in your manual are the ones to follow.