How to fold your iCandy Orange 4 for collection
Seat or carrycot off, then release the two collars on the handlebar tubes and fold the frame flat, with the seat packed alongside.
Watch it first
Get it ready
Step 1: Empty the basket and any pockets. No need to clean it: we wash every buggy.
Step 2: Take off the rain cover, footmuff, cup holder and anything else clipped on. They go in the box too if you told us about them.
Take it apart
Step 3: Close the canopy.
Step 4: Press the release buttons on both sides of the seat unit or carrycot and lift it straight up off the frame.
Step 5: Take off any carrycot or car seat adaptors.
Fold the frame
Step 6: Squeeze the trigger under the collar on one handlebar tube and slide the collar up towards the handlebar.
Step 7: Do the same on the other side.
Step 8: Push the handlebar forwards and down towards the frame.
Step 9: Press down on the frame until it clicks and locks folded.
Step 10: Stand the folded frame up on its end.
Good to know
- The frame can also fold with the seat on if it faces forwards, but the seat off gives the smallest package for the box.
- The rear wheels come off if the box is tight: press the button in the centre of each rear wheel and pull it off the axle.
Pack the box
Step 11: Put the folded frame in the box first, wheels down.
Step 12: Slide the seat unit or carrycot in beside it, then tuck the small bits into the gaps. A carrier bag keeps them together.
Step 13: Close the flaps and re-seal the box with the roll of tape we sent: along the middle seam, over the ends and down the sides.
Step 14: Peel the backing off the wallet, with the DPD label still inside, and stick it on top beside the tape, over any old labels. There is nothing to print.
Buttons and handles move about a little between production years. If yours looks different, the fold steps in your manual are the ones to follow.