How to fold your Bugaboo Bee 6 for collection
Folds in one piece with the seat on, in either direction, and stands up on its kickstand.
Watch it first
Get it ready
Step 1: Empty the basket and any pockets. No need to clean it: we wash every buggy.
Step 2: Take off the rain cover, footmuff, cup holder and anything else clipped on. They go in the box too if you told us about them.
Fold the frame
Step 3: Put the brake on and close the canopy.
Step 4: Pull the recline lever on the back of the seat and move the seat so it lines up with the handlebar.
Step 5: Undo the handlebar locks, push the handlebar down and clip the locks shut again.
Step 6: Press the buttons on both sides of the handlebar to collapse the frame.
Step 7: Lift it up and use the front leg to stand it up on its own.
Good to know
- World-facing, pull the seat back in line with the handlebar. Parent-facing, bring the seat all the way forward instead.
Pack the box
Step 8: Put the folded frame in the box first, wheels down.
Step 9: Slide the seat unit or carrycot in beside it, then tuck the small bits into the gaps. A carrier bag keeps them together.
Step 10: Close the flaps and re-seal the box with the roll of tape we sent: along the middle seam, over the ends and down the sides.
Step 11: Peel the backing off the wallet, with the DPD label still inside, and stick it on top beside the tape, over any old labels. There is nothing to print.
Buttons and handles move about a little between production years. If yours looks different, the fold steps in your manual are the ones to follow.