We’d like to use cookies from Google and Meta to see how people find Rebuggy, which ads work, and to show our ads to people who’ve visited. Our other visit statistics are cookie-free. More in our privacy notice.

Skip to content

How to fold your Bugaboo Donkey 3 for collection

Seats, carrycot and side luggage basket off and packed alongside, then the frame folds in one piece and stands up on its own.

Watch it first

Get it ready

  1. Step 1: Empty the basket and any pockets. No need to clean it: we wash every buggy.

  2. Step 2: Take off the rain cover, footmuff, cup holder and anything else clipped on. They go in the box too if you told us about them.

Take it apart

  1. Step 3: Close the sun canopy on each seat or carrycot.

  2. Step 4: Press the release buttons on both sides of each seat or carrycot and lift it straight up off the frame.

  3. Step 5: Take the mattress out of the carrycot and fold the carrycot flat.

  4. Step 6: In mono mode, unclip the side luggage basket and pack it alongside.

Fold the frame

  1. Step 7: Put the brake on.

  2. Step 8: Push the swivel locks down on both front wheels so they cannot turn.

  3. Step 9: Slide the handlebar down to its lowest position.

  4. Step 10: Slide the secondary lock on the folding lock under one side of the handlebar.

  5. Step 11: Pull up the folding locks on both sides of the handlebar at the same time and push the handlebar down to the floor.

  6. Step 12: Lift the frame by the middle to bring the wheels together, and stand it up.

Good to know

  • It also folds with the seat still on and facing forwards, but the box packs more easily with the seat off.
  • It folds the same way in mono, duo or twin mode, but in duo or twin mode the folded frame is 74cm wide, so check it fits the box before you tape it.

Pack the box

  1. Step 13: Put the folded frame in the box first, wheels down.

  2. Step 14: Slide the seat unit or carrycot in beside it, then tuck the small bits into the gaps. A carrier bag keeps them together.

  3. Step 15: Close the flaps and re-seal the box with the roll of tape we sent: along the middle seam, over the ends and down the sides.

  4. Step 16: Peel the backing off the wallet, with the DPD label still inside, and stick it on top beside the tape, over any old labels. There is nothing to print.

Buttons and handles move about a little between production years. If yours looks different, the fold steps in your manual are the ones to follow.