How to fold your Bugaboo Donkey 6 for collection
Seats, carrycot and side bag off and packed alongside, then the frame folds in one piece and stands up on its own.
Watch it first
Get it ready
Step 1: Empty the basket and any pockets. No need to clean it: we wash every buggy.
Step 2: Take off the rain cover, footmuff, cup holder and anything else clipped on. They go in the box too if you told us about them.
Take it apart
Step 3: Close the sun canopy on each seat or carrycot.
Step 4: Take off each seat or carrycot and lift it off the frame.
Step 5: Unclip the side bag from the frame, or from the handlebar in double mode, and pack it alongside.
Fold the frame
Step 6: Put the brake on.
Step 7: Push the handlebar down to its lowest position.
Step 8: Press the buttons on both sides of the handlebar and fold it down.
Step 9: Step to the side, lift the central bar and fold the frame until it stands up on its own.
Good to know
- It also folds with the seat or carrycot still on, if you close the canopy and recline it head down first, but the box packs more easily with them off.
- It folds the same way in double or twin mode, but the folded frame is 74cm wide then, so check it fits the box before you tape it.
Pack the box
Step 10: Put the folded frame in the box first, wheels down.
Step 11: Slide the seat unit or carrycot in beside it, then tuck the small bits into the gaps. A carrier bag keeps them together.
Step 12: Close the flaps and re-seal the box with the roll of tape we sent: along the middle seam, over the ends and down the sides.
Step 13: Peel the backing off the wallet, with the DPD label still inside, and stick it on top beside the tape, over any old labels. There is nothing to print.
Buttons and handles move about a little between production years. If yours looks different, the fold steps in your manual are the ones to follow.